Private Reserve Guitars



  
Electric Guitars
Acoustic Instruments
Bass Guitars and Uprights
Amplifiers and Effects
Home > Guitar Amplifiers and Effects > Guitar Amplifiers > Combo Amps > Acoustic Combo Amps > AER Basic Performer Acoustic Guitar Combo Amp

AER Basic Performer Acoustic Guitar Combo Amp
AER Basic Performer Acoustic Guitar Combo Amp (BASICPERFORMER)
   #485703 Black
List: $2,399.00
Sale:
$2,159.00
Save: $240.00 (10%)

Quantity:  

Add to Wishlist
Weight requires an additional shipping cost of $19.99

Details
Rebate/Coupon

    Product Details
AER Basic Performer Acoustic Guitar Combo Amp
The Basic Performer Acoustic Guitar Amp with its specially designed construction and its 4 x 60 watt power is an ideal tool for acoustic and electric bass-amplification. More than that, it suits very well for all instruments with strength in the low register, e.g.: cello, harp etc. Apart from its two channels with three-band tone- control and mute-switch it offers a compressor and a notch filter.Long scale lengths, huge body sizes, and resonance problems are only some trouble zones of the acoustic instrument. The small twin-cone system is perfect - it is fast, provides a superior coverage for the critical mid-range and has got enough substance in the bass range. The AER Basic Performer has four 8"-twin-cone speakers which are individually powered by four 60W power amps provide for the required surface area and the necessary sound pressure level.The special AER band-pass / bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. Hi-end preamps, proper filters and additional professional sound design make the Basic Performer amplifier a multitalented all-round solution.The sound characteristics of this AER amp are full range, open and light - breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments such as harp, cello, accordion or even try a jazz guitar.


The range and power to amplify acoustic guitars and basses right.
  • Channels 1 + 2:
  • Input: XLR-combination-socket with a socket for a 6.3 mm jack-plug and an XLR-mle-socket
  • Channel Mute: switch to mute the channel
  • Line/Mic: switch to adjust input sensitivity
  • Line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups
  • Mic: symmetrical microphone input with 24 V phantom power
  • Clip: overload indicator
  • Gain: input level control
  • Bass: tone control for bass
  • Middle: tone control for mid-range
  • Treble: tone control for treble
  • Input: socket for a 6.3 mm jack plug
  • Channel Mute: switch to mute the channel
  • Pad: damp-switch
  • Clip: overload indicator
  • Gain: input level control
  • Color: mid-range contour filter, switchable
  • Contour: control for mixing-in internally generated harmonics
  • Bass: tone control for bass
  • Middle: tone control for mid-range
  • Frequency: mid-range frequency selection
  • Treble: tone control for treble
  • Front, bottom (from left to right):
  • DI Pre/Post: DI-switch pre/post EQ
  • 24V Phantom: 24 volt-phantom-power on/off
  • 9V Phantom: 9 volt-phantom-power on/off
  • Compressor: switches compressor on/off
  • Threshold: control for the operational level
  • Active: compressor operational
  • Ratio: control for the compression-ratio
  • ñ1dB: indicates the reduction of amplification in dB
  • ñ3dB: indicates the reduction of amplification in dB
  • ñ6dB: indicates the reduction of amplification in dB
  • ñ12dB: indicates the reduction of amplification in dB
  • Notch Filter: filter on/off
  • Frequency: level-control for the frequency-selection
  • Aux Return: level-control for aux return
  • Effect Return: level-control for effect return
  • Power: power indicator lamp
  • Master: Solo - level-control for the overall volume, solo-setting, Ensemble - level-control for the overall volume, ensemble-setting
  • Rear:
  • Tape In: stereo input for CD and tape
  • Phones: headphone output, stereo
  • Tuner: output for a tuner
  • Insert: insert-point, Tip = Send, Ring = Return, Line Out line-output
  • DI Out: XLR-output pre-master
  • Send: output for an external effect device
  • Return: input for an external effect device or other signal, for example CD-player
  • FS-Effect: footswitch effect on/off
  • FS-Master: socket for a stereo footswitch, master-selection solo/ensemble
  • FS-Mute: socket for a stereo footswitch to mute the channels
  • Voltage Select: voltage selection switch
  • Power: power supply with line-socket and fuse-holder


We guarantee your total satisfaction and lowest possible price. Order today with total confidence!


    Accessories
Save an extra 10% Customers who bought the AER Basic Performer Acoustic Guitar Combo Amp also bought these accessories.
Save an extra 10% on selected items when you buy now.

    Customers who bought the AER Basic Performer Acoustic Guitar Combo Amp also bought these accessories:

    DescriptionOptionsPrice
    

    Reviews  Write an online review.
    write the first review of this item
  © 2006 Private Reserve Guitars / Musician's Friend
Privacy Policy  |  Purchase Terms and Conditions  |  Terms of Use
HACKER SAFE certified sites prevent over 99.9% of hacker crime.